Self Expandable Stent Crimping Machine - CR-240-SA
Description
The CR-240-SA Stent Crimping Machine is developed for the crimping and transfer into the delivery system of self-expandable stents up to 200 mm length with a maximum diameter of approx. 30 mm.
Specifications
- Double camera system integrated
- Servo controlled stent crimping head with Zero Gap technology
- Exchangeable pusher rods and delivery system holders for
various stent diameters - 15.5” user interface with recipe control
- The CR-240-SA is built with a very high-quality benchmark
resulting in a stable and robust design with minimal cost of
ownership. - The stent crimper can be easily calibrated using the one-point
automatic diameter calibration function built into the system.
Calibration in seconds. - Full process data logging to the internal PC system and
transfer possibly to external USB for registration or analysis
Technical Specs
|
Stent crimping length |
240 mm head. Maximum 200 mm length stents |
|
Stent type |
Self-expandable stents (also for covered stents) |
|
Maximum diameter loading |
30 mm (optionally larger sizes possible) |
|
Maximum opening crimp head |
35 mm |
|
Minimum closing diameter |
0.1 mm (software limit) |
|
Crimp head control |
Servo controlled position / force |
|
Diameter accuracy |
+/- 0.02 mm @ 100 N |
|
Maximum crimp force |
1000 N radial. Dynamic Diameter Compensation possible |
|
Crimping speeds |
0.1 mm/s – 10 mm/s |
|
Maximum transfer force |
200 N with loadcell measurement on the pusher |
|
Stent loading |
Manual (with optional aid of two microscope camera’s) |
|
GUI |
15.5” colour touch panel |
|
Control software |
Zoomable process graphs Recipe based Password levels (operator, engineer, calibrator) |
|
Ethernet |
2x |
|
USB |
2x |
|
Required air pressure |
7 bar minimum |
|
Power supply |
115 / 240VAC / 0.5kW |
|
Safety systems |
Covers with coded magnets and safety PLC system and double hand control system. |
