CT Mandrel Puller

CT MANDREL PULLER is a simple machine designed to pull out mandrels from any type of catheter tubing. This machine can be equipped with either Servo or Pneumatic controls depending on operational needs. We have several different ways to grip the mandrels and offer mandrel handling after the unit is completed.

Description

We’re able to identify the best way to pull the mandrel from the unit, and can be as simple as loading and unloading the machine with the assembly. Various machines can be customized from 1 up unit to a 10 up unit. We are equipped to identify the hardest spot and design the most appropriate gripping issues and turn them around to find the “Sweet Spot.” This will give the ability to break the unit free from the mandrel, thereby pulling the mandrel with greater ease.

Specifications

Pulls solid or stretch materials out of a finished units
Equipment can be fabricated to meet length and diameter requirements
Standard machines pull 56” and 89” lengths
Pull speeds and other items can be programmed or set to a specific speed
Power: 120 VAC/20 AMP supply (typically)
Multiples can be pulled at one time on a custom basis

Options

Horizontal vs Vertical options available
Parts can be pulled using a stripper tool, or a silicone gripper stiction method which avoids damage to the unit
Drives: Pneumatic, Servo or DC
Controls: Push Button or HMI available

"When we went searching for a coil winding equipment manufacturer, we came across EBD. What set them apart from other choices was their machine’s super-fine tension control and their staff’s can-do attitude. Once the machines we ordered were complete, it was clear the EBD not only built a quality product, but fully understood the process the machine performed. They continue to add value with their expertise in coil winding. We have returned to EBD to buy machines over and over."

“We recently acquired several winders and re-spoolers from Engineering By Design and the equipment is simply phenomenal. The user interface is easy to navigate and re-configure. Our application required high repeatability and high resolution on key process variables. EBD was able to deliver and exceed our expectations. The equipment is very reliable and so is their support. Our interaction felt like we were working for the same company.”

“We have several kinds of EBD equipment at our plant including Winders, Laminators, and Wire Formers. The design of each machine is excellent, and the modular nature of the equipment allows new orders to be customized to meet our specific manufacturing process needs. The control systems and software built into the equipment make it easy to configure manufacturing process steps, resulting in an effective and repeatable process. The machines have very little down time. On the occasions when technical support has been needed, EBD has proven to be very knowledgeable and responsive, leading to a speedy resolution of the issue.”

“We recently acquired several reel winders and reels from Engineering By Design, and the equipment is just phenomenal. The user interface is easy to navigate and modify. Our application required that the equipment be the most repeatable and had the highest resolution to control process variables that were critical. EBD met and exceeded our design requirements. The equipment is very reliable and its technical support is also reliable. Our experience was as if we worked for the same company.”

Previous

Next

Privacy Settings