High Performance Dereeler - Accu-Feed HPD

The Accu-Feed HPD High Performance Dereeler is similar to the Accu-Feed LTD in design and function. However, the HPD can handle a much larger spool as well as heavy gauge materials. A larger dancer arm, stronger drive transmission and revised part path eliminates reverse-bending during the feed process, which is ideal for olefin, Teflon®, and heavy gauge materials.

Key Features

Designed for high-volume, critical tolerance manufacturing
Precision ball-bearing construction for low dancer arm friction
Torque-limited for safety
Communicates with Accu-Cut machines
Incorporates static-reducing technology for cleanliness

Specs

Speed: 120rpm
Maximum OD: 0.25” (6.4mm)
Maximum spool diameter: 17.75” (0.45m)
Maximum spool width: 10” (0.25m)
Maximum spool weight: 12 lbs. (5.4kg)
Power: 100-240VAC at 50/60Hz
Dimensions: 30” x 15” x 20” (75” x 40” x 50” cm)
Weight: 20 lb. (9kg)

"When we went searching for a coil winding equipment manufacturer, we came across EBD. What set them apart from other choices was their machine’s super-fine tension control and their staff’s can-do attitude. Once the machines we ordered were complete, it was clear the EBD not only built a quality product, but fully understood the process the machine performed. They continue to add value with their expertise in coil winding. We have returned to EBD to buy machines over and over."

“We recently acquired several winders and re-spoolers from Engineering By Design and the equipment is simply phenomenal. The user interface is easy to navigate and re-configure. Our application required high repeatability and high resolution on key process variables. EBD was able to deliver and exceed our expectations. The equipment is very reliable and so is their support. Our interaction felt like we were working for the same company.”

“We have several kinds of EBD equipment at our plant including Winders, Laminators, and Wire Formers. The design of each machine is excellent, and the modular nature of the equipment allows new orders to be customized to meet our specific manufacturing process needs. The control systems and software built into the equipment make it easy to configure manufacturing process steps, resulting in an effective and repeatable process. The machines have very little down time. On the occasions when technical support has been needed, EBD has proven to be very knowledgeable and responsive, leading to a speedy resolution of the issue.”

“We recently acquired several reel winders and reels from Engineering By Design, and the equipment is just phenomenal. The user interface is easy to navigate and modify. Our application required that the equipment be the most repeatable and had the highest resolution to control process variables that were critical. EBD met and exceeded our design requirements. The equipment is very reliable and its technical support is also reliable. Our experience was as if we worked for the same company.”

Privacy Settings

High Performance Dereeler - Accu-Feed HPD

Key Features

Specs

Let’s Build Something Together.

Simplifying The Complicated

Fill out form below to download brochure.