Thermal Bonding

Robust and stable thermal bonding machine designed to provide the user with an effective and reliable production machine for bonding all sorts of balloon and catheter components with minimal cost of ownership. The BT-NG machines is a thermal bonding machine based on the hot-jaw principle. It incorporates 25 years of experience with the thermal bonding process. The small stainless steel dies used in the machines have accurate temperature control and heat up very fast. The BT-NG has a mximum of four cavities that can be utilized at two different temperatures. The cavity position is software controlled. The dies and closing gripper are mounted in an exchangeable unit. This allows for very fast switching between dies by replacing this unit with another unit with a different set of dies. Alignment is accurate and therefore the

Description

Robust and stable thermal bonding machine designed to provide the user with an effective and reliable production machine for bonding all sorts of balloon and catheter components with minimal cost of ownership.

 

The BT-NG machines is a thermal bonding machine based on the hot-jaw principle. It incorporates 25 years of experience with the thermal bonding process. The small stainless steel dies used in the machines have accurate temperature control and heat up very fast.

 

The BT-NG has a maximum of four cavities that can be utilized at two different temperatures. The cavity position is software controlled. The dies and closing gripper are mounted in an exchangeable unit. This allows for very fast switching between dies by replacing this unit with another unit with a different set of dies. Alignment is accurate and therefore the machine can be operational again in minutes. The unit has a fully automated plug-in system so no more manual plugging of the unit is required.

 

A small camera allows the operator easy and repeatable alignment. The camera image is projected on the user interface. Horizontal and vertical crosshairs can be added to aid in the alignment.

 

The machine is recipe controlled and temperatures, welding times, crosshair positions, colors and more are part of the recipe. When switching between cavities (but actuating the turning knob at the front) parameters are automatically loaded according to the recipe setup.

 

The machine can be optionally equipped with a servopneumatic axial compression unit. This allows for the application of a small axial force (max. 10N) during the welding process to aid in reflow. This unit can be mounted on either side of the machine (specify on ordering).

Specifications

  • Die system – Two split dies with quick exchange units
  • Maximum temperature – 240C (optional higher temperatures possible)
  • Number of cavities – Max 4 with software controlled X positioning
  • Temperature zones – 2 temperature zones
  • Product handling- Product fixed on a table with interchangeable inlays and clamps
  • Product alignment – Optical with the aid of color video camera and max. 20 software crosshairs – (both horizontal as vertical)
  • Axial compression – Optional axial compression unit providing max. 10N of axial pressure during the welding (at proximal or distal side)

  • Air cooling – Air cooling to allow for fast cooling of the welded product
  • GUI – 10” colour touch panel
  • Control softwareRecipe based with software positioning of the dies Password levels (operator, engineer, calibrator) Remote support option
  • Ethernet – 1x
  • USB – 2x
  • Required air pressure – 7 bar minimum
  • Power supply – 115 / 240VAC / 0.5kW

Specifications

  • Die system – Two split dies with quick exchange units
  • Maximum temperature – 240C (optional higher temperatures possible)
  • Number of cavities – Max 4 with software controlled X positioning
  • Temperature zones – 2 temperature zones
  • Product handling- Product fixed on a table with interchangeable inlays and clamps
  • Product alignment – Optical with the aid of color video camera and max. 20 software crosshairs – (both horizontal as vertical)
  • Axial compression – Optional axial compression unit providing max. 10N of axial pressure during the welding (at proximal or distal side)
  • Air cooling – Air cooling to allow for fast cooling of the welded product
  • GUI – 10” colour touch panel
  • Control softwareRecipe based with software positioning of the dies Password levels (operator, engineer, calibrator) Remote support option
  • Ethernet – 1x
  • USB – 2x
  • Required air pressure – 7 bar minimum
  • Power supply – 115 / 240VAC / 0.5kW