UV Laser Marking Machine

Description

The SYNEO Accu-Lase V200 Automated UV Laser Processing System allows for greater process capability in precision tube cutting of polyimide tubing and complex hole making, as well as polymer marking. The V200 is a fully-automated laser micromachining system, allowing the operator to batch load parts, which are singularly picked up and fed by a vacuum picked.

Key Features

UV laser – optimal for laser micromachining and laser cutting of polyimide parts
Automatic mandrel insertion for tubing provides quality and helps protect opposite wall
Precision handling of parts for repeatable features
Vision system allows for easy viewing of the process
Capable of complex shapes, marking and cutoff of polymers and metals
Automatic feed from batch loading

Universal Specifications

OD handling: 0.012-0.150″ (.304mm-3.81mm)
Input length handling: 5-72″ (12.7cm-182.88cm)
Marking speed: 0.196″ -39.370″ (5-1000mm/second)
Wavelength: 355nm

Typical Materials Processed

Marking
Plastic stick tubing
Nitinol and stainless steel wires
Coils
Silicone
Micromachining • Polyimide
Pebax®

"When we went searching for a coil winding equipment manufacturer, we came across EBD. What set them apart from other choices was their machine’s super-fine tension control and their staff’s can-do attitude. Once the machines we ordered were complete, it was clear the EBD not only built a quality product, but fully understood the process the machine performed. They continue to add value with their expertise in coil winding. We have returned to EBD to buy machines over and over."

“We recently acquired several winders and re-spoolers from Engineering By Design and the equipment is simply phenomenal. The user interface is easy to navigate and re-configure. Our application required high repeatability and high resolution on key process variables. EBD was able to deliver and exceed our expectations. The equipment is very reliable and so is their support. Our interaction felt like we were working for the same company.”

“We have several kinds of EBD equipment at our plant including Winders, Laminators, and Wire Formers. The design of each machine is excellent, and the modular nature of the equipment allows new orders to be customized to meet our specific manufacturing process needs. The control systems and software built into the equipment make it easy to configure manufacturing process steps, resulting in an effective and repeatable process. The machines have very little down time. On the occasions when technical support has been needed, EBD has proven to be very knowledgeable and responsive, leading to a speedy resolution of the issue.”

“We recently acquired several reel winders and reels from Engineering By Design, and the equipment is just phenomenal. The user interface is easy to navigate and modify. Our application required that the equipment be the most repeatable and had the highest resolution to control process variables that were critical. EBD met and exceeded our design requirements. The equipment is very reliable and its technical support is also reliable. Our experience was as if we worked for the same company.”

Previous

Next

Privacy Settings