Heat Shrink Skiver

The CT Skivers is a great flexible way to remove recovered heat shrink from the catheter reflow (laminating) post process. These units are low cost, small, and allow the operator to perform this function anywhere. Each unit is designed to fit the catheter so as not to scratch the surface. Our team of engineers takes the finished OD of the catheter you provide and calculates the tolerance and space required to provide you with a repeatable product.

Specifications

Each unit is hand-polished, and features are blended to allow the unit to move through the material smoothly.
Standard material offerings are 416 or 440 Stainless Steel, Peek, and ULTUM.
Each size is calculated so the units are sized correctly.
Hoods are used to protect the operator, the unit, and the part if dropped.

Options

Standard Skivers is made of 416 Stainless steel
Hoods are Black Delrin for Metal units and White Delrin for Plastic
#8 0.250” Screw for blade clamp
#8 1.00” Screw for hood clamp
Ranges are Micro, Regular, and Large

"When we went searching for a coil winding equipment manufacturer, we came across EBD. What set them apart from other choices was their machine’s super-fine tension control and their staff’s can-do attitude. Once the machines we ordered were complete, it was clear the EBD not only built a quality product, but fully understood the process the machine performed. They continue to add value with their expertise in coil winding. We have returned to EBD to buy machines over and over."

“We recently acquired several winders and re-spoolers from Engineering By Design and the equipment is simply phenomenal. The user interface is easy to navigate and re-configure. Our application required high repeatability and high resolution on key process variables. EBD was able to deliver and exceed our expectations. The equipment is very reliable and so is their support. Our interaction felt like we were working for the same company.”

“We have several kinds of EBD equipment at our plant including Winders, Laminators, and Wire Formers. The design of each machine is excellent, and the modular nature of the equipment allows new orders to be customized to meet our specific manufacturing process needs. The control systems and software built into the equipment make it easy to configure manufacturing process steps, resulting in an effective and repeatable process. The machines have very little down time. On the occasions when technical support has been needed, EBD has proven to be very knowledgeable and responsive, leading to a speedy resolution of the issue.”

“We recently acquired several reel winders and reels from Engineering By Design, and the equipment is just phenomenal. The user interface is easy to navigate and modify. Our application required that the equipment be the most repeatable and had the highest resolution to control process variables that were critical. EBD met and exceeded our design requirements. The equipment is very reliable and its technical support is also reliable. Our experience was as if we worked for the same company.”

Previous

Next

Privacy Settings