Testing

GPL-501B: Gas Pressure Leak Tester

The Interface gas pressure leak tester, model GPL-501, is a tabletop machine used for nondestructive leak testing of catheter components using dry nitrogen gas.

GPL-5020: Gas Pressure Leak Tester

The Interface Gas Pressure Leak Tester, Model GPL-5020, is designed for rapid, non-destructive testing of catheters.

HPT-1000: Hydraulic Pressure Tester

The Hydraulic Pressure Testers provide critical hydraulic test functions for balloon catheters and components, including tubing and balloons.

PT-3070: Hydraulic Pressure Tester

The PT-3070 is ideally suited for testing small plastic pressure retaining components such as welded or bonded plastic components and tubing assemblies that are typically encountered in many disposable medical devices, i.e. balloon catheters.

"When we went searching for a coil winding equipment manufacturer, we came across EBD. What set them apart from other choices was their machine’s super-fine tension control and their staff’s can-do attitude. Once the machines we ordered were complete, it was clear the EBD not only built a quality product, but fully understood the process the machine performed. They continue to add value with their expertise in coil winding. We have returned to EBD to buy machines over and over."

“We recently acquired several winders and re-spoolers from Engineering By Design and the equipment is simply phenomenal. The user interface is easy to navigate and re-configure. Our application required high repeatability and high resolution on key process variables. EBD was able to deliver and exceed our expectations. The equipment is very reliable and so is their support. Our interaction felt like we were working for the same company.”

“We have several kinds of EBD equipment at our plant including Winders, Laminators, and Wire Formers. The design of each machine is excellent, and the modular nature of the equipment allows new orders to be customized to meet our specific manufacturing process needs. The control systems and software built into the equipment make it easy to configure manufacturing process steps, resulting in an effective and repeatable process. The machines have very little down time. On the occasions when technical support has been needed, EBD has proven to be very knowledgeable and responsive, leading to a speedy resolution of the issue.”

“We recently acquired several reel winders and reels from Engineering By Design, and the equipment is just phenomenal. The user interface is easy to navigate and modify. Our application required that the equipment be the most repeatable and had the highest resolution to control process variables that were critical. EBD met and exceeded our design requirements. The equipment is very reliable and its technical support is also reliable. Our experience was as if we worked for the same company.”

Privacy Settings

Testing

GPL-501B: Gas Pressure Leak Tester

GPL-5020: Gas Pressure Leak Tester

HPT-1000: Hydraulic Pressure Tester

PT-3070: Hydraulic Pressure Tester

Let’s Build Something Together.

Simplifying The Complicated